Features
1. World's most advanced creasing matrix made from plastic, pressboard and fibre and resin for various die cutting jobs.
2. Accurate locator – ensures perfect registration
3. Low profile chamfer – board flows freely over the matrix; board marking is reduced
4. Finger lift adhesive tape – backing paper easily and quickly removed
5. New and strong adhesive removes cleanly from the plate after use, will not move about during die cutting jobs
6. Special sizes available to suit all board types, off-centers and multi-crease for close creasing rule
7. It is extremely durable and accurate and provides benefits in time and cost.
|
Series |
Plastic based Creasing Matrix(white/yellow/orange) |
|
Type |
Standard/Narrow/Off-center/Double |
|
Material |
PVC base with plastic shoulder |
|
Punching Time |
10,000-30,000 times |
|
Application |
Developed for small and medium print runs |
|
Packing |
70cm/pc,50pcs/box,10boxes/carton |
|
Storage Period |
6 months to 2 years |
|
Notes |
Matrix in rolls is available upon demands |
|
Packing |
70cm/pc,50pcs/box,10boxes/carton |
|
Storage Period |
6 months to 2 years |
|
Notes |
Matrix in rolls is available upon demands |
Operation Procedure
1. Measure the length of the creasing rule
2. Mark the measurement and cut the matrix
3. Mount the cutting piece into the creasing rule with locator
4. Remove all of the backing tapes
5. Transfer the matrix to the die cutting steel plate
6. Remove all of the locators 7. Miter the sharp angle
Method to choose creasing matrix size for cardboard paper. Size table ( subject to 23.8 mm die-cutting rules)
|
Cardboard Weight(g) |
Thickness of Cardboard(mm) |
The height of Creasing Rules(mm) |
|||||
|
23.50 |
23.40 |
23.30 |
23.20 |
23.10 |
23.00 |
||
|
200 |
0.28mm |
0.3×1.0 |
0.4×1.0 |
|
|
|
|
|
250 |
0.35mm |
0.3×1.2 |
0.4×1.2 |
0.5×1.2 |
|
|
|
|
300 |
0.42mm |
0.3×1.3 |
0.4×1.3 |
0.5×1.4 |
|
|
|
|
350 |
0.50mm |
|
0.4×1.4 |
0.5×1.5 |
0.6×1.5 |
|
|
|
400 |
0.56mm |
|
|
0.5×1.6 |
0.6×1.6 |
|
|
|
450 |
0.63mm |
|
|
0.5×1.7 |
0.6×1.7 |
0.7×1.7 |
|
|
500 |
0.70mm |
|
|
|
|
0.7×1.7 |
0.8×1.7 |
|
Notes: the specifications above are only recommendation, among which the specifications marked with are recommended to choose firstly. |
|||||||
For instance: the thickness of the cardboard: 0.52mm; the thickness of creasing rules: 0.71mm, according to calculation formula: A=0.52≈0.5(mm); B=0.52 x 1.5 +0.71 = 1.49 ≈1.5(mm),so we should choose the size of 0.5 x 1.5.
Method to choose creasing matrix size for corrugated paper. Size table ( subject to 23.8 mm die-cutting rules)
|
Corrugated Paper |
Thickness of corrugated paper after compression |
Height of creasing rule |
Choice of creasing matrix(thickness of creasing rule is 1.05mm) |
Choice of creasing matrix(thickness of creasing rule is 1.42mm) |
|
F-Flute |
0.50mm |
23.20mm |
0.5×1.7 |
|
|
E- Flute |
0.65mm |
23.10mm |
0.7×2.3 |
-- |
|
E- Flute |
0.75mm |
23.00mm |
0.8×2.5 |
-- |
|
B- Flute |
0.85mm |
22.90mm |
0.8×2.7 |
0.8×3.2 |
|
B- Flute |
0.95mm |
22.80mm |
1.0×3.0 |
1.0×3.5 |
|
C- Flute |
1.05mm |
22.70mm |
1.0×3.2 |
1.0×3.5 |
|
C- Flute |
1.15mm |
22.60mm |
-- |
1.0×4.0 |
Remarks: the above blanks just for reference and the exact specification suitable for your job should be chosen according to your actual conditions and material thickness.
Plastic-based Size Table
|
H x W mm |
H x W mm |
H x W mm |
H x W mm |
H x W mm |
|
GRB 0.3×0.8 C |
GRB 0.5 x 1.0 C |
GRB 0.6 x 3.2 C |
GRB 1.0 x 3.0 C |
GRZ0.3x0.8 C |
|
GRB 0.3×1.0 C |
GRB 0.5 x 1.2 C |
GRB 0.6 x 3.5 C |
GRB 1.0 x 3.2 C |
GRZ0.3x1.0 C |
|
GRB 0.3×1.2 C |
GRB 0.5 x 1.3 C |
GRB 0.7 x 2.1 C |
GRB 1.0 x 3.5 C |
GRZ0.3x1.2 C |
|
GRB 0.3x1.3 C |
GRB 0.5 x 1.4 C |
GRB0.7x 2.3 C |
GRB 1.0 x 4.0 C |
GRZ0.3x1.3 C |
|
GRB 0.3×1.4 C |
GRB 0.5 x 1.5 C |
GRB 0.7 x 2.5 C |
GRB 1.0 x 4.5 C |
GRZ0.4x0.8 C |
|
GRB 0.3×1.5 C |
GRB 0.5 x 1.7 C |
GRB 0.7 x 2.7 C |
GRB 1.0 x 5.0 C |
GRZ0.4x1.0 C |
|
GRB 0.4×1.0 C |
GRB 0.5 x 1.9 C |
GRB 0.8 x 2.5 C |
GRB 1.2 x 4.0 C |
GRZ0.4x1.2 C |
|
GRB0.4x1.2 C |
GRB0.6 x 1.7 C |
GRB0.8x2.7 C |
GRB 1.2 x 4.5 C |
GRZ0.4x1.3 C |
|
GRB0.4x1.3 C |
GRB0.6 x 1.9 C |
GRB0.8x3.2 C |
GRB 1.2 x 5.0 C |
GRZ0.4x1.4 C |
|
GRB0.4x1.4 C |
GRB0.6 x 2.3 C |
GRB0.8x3.5 C |
GRB 1.2 x 6.0 C |
GRZ0.5x1.0 C |
|
GRB0.4x1.5 C |
GRB0.6 x2.5 C |
GRB0.8x4.0 C |
GRB 1.4 x 6.0 C |
GRZ0.5x1.2 C |
|
GRB0.4x1.6 C |
GRB0.6 x 2.7 C |
GRB0.8x5.0 C |
GRB 1.4 x 7.0 C |
GRZ0.5x1.3 C |
|
GRZ0.5x1.4 C |
GRZ0.5 x 1.5 C |
GRZ0.5x1.6 C |
GRZ 0.5 x 1.7 C |
GRZ0.5x1.9 C |
|
|
|
Packing Photos
Hot Tags: pet fiber based creasing matrix, China pet fiber based creasing matrix manufacturers, suppliers, factory, creasing matrix, Pet Fiber Based Creasing Matrix, Pvc Creasing Matrix
