Paper Flexo Printing Machine With Punching Die Cutting Inline
Feature
This is an economical and environmental friendly flexo printing and punching die cutting inline, when blank raw material feed into machine, firstly it will be printed, and when printing part is finished, printed material will be run into punching die cutting part, cut into sheet outlet such as paper plate, paper cup, ice cream cone etc. Machine will be controlled by PLC, all data will be displayed on screen.
Main technical parameter
|
Model |
HH-RY850B-4C |
|
Printing part |
|
|
Printing speed |
50m-60m/min |
|
Printing color |
4 colors |
|
Print max width |
840mm |
|
Unwind roll width |
850mm |
|
Unwind roll diameter |
1200mm |
|
Printing length |
180-380mm |
|
Registering accuracy |
±0.10mm |
|
Total power |
30.5KW |
|
Air press |
0.6MP |
|
Voltage |
380V±10% |
|
Machine dimension |
3500mmX1300mmX2350mm |
|
Punching part |
|
|
Punching speed |
150-200 times/min |
|
Maximum feeding width |
850mm |
|
Maximum die cutting width |
400*840mm |
|
Locating precision |
±0.1mm |
|
Total power |
9kw |
|
Lubrication system |
Manual |
Main configuration
|
Parts Name |
Brand |
Quantity |
|
Standard machine configuration |
||
|
76mm(3") core diameter air expanding shaft |
1pcs |
|
|
Hydraulic lifting system for unwinding |
One set |
|
|
Main motor |
1 set |
|
|
Magnetic brake 200N For Unwinding |
1Pcs |
|
|
isolate IR dry units |
4 units |
|
|
printing rollers |
4 pcs |
|
|
ceramic anilox rollers |
4 pcs |
|
|
doctor blade |
4 pcs |
|
|
Bottom mat |
14pcs |
|
|
gear motors |
4 pcs |
|
|
temp control |
4 units |
|
|
Hydraulic pump |
1 set |
|
|
Main reduction motor |
1 set |
|
|
Die cutting mould |
1set |
|
|
Tool box |
1 set |
|
|
Main electrical component |
||
|
buttons |
Schneider/Delixi |
|
|
Web-guiding system |
ZXTEC, China |
1 set |
|
Relay |
CHNT,China |
|
|
AC contactor |
Delixi,China |
1pcs |
|
Servo driver |
Inovance,China |
1pcs |
|
Servo motor 3KW |
Inovance,China |
1pcs |
|
Touch screen |
Weinview,Taiwan |
1pcs |
|
Induction sensor |
China |
2pcs |
|
Color code Photocell (photoelectric eye) |
Matsushita,Japan |
1pcs |
|
Inverter 5.5kw |
Schneider |
1pcs |
|
PLC |
Inovance |
1pcs |
Quotation of Optional Configuration
mould :
Machine detailed image
More machine details
Printing parts
Electronic paper web guide traction device, there was a small material web movement, the system can accurately continuously revised.
There has 1 set automatic tension controller and magnetic powder to control unwinding.
Our advantage add magnetic brake on bottom roller to increase resistance.
Power Supply, Stop Button, Start Button and Emergency Stop.
Temperature control by PLC for each Heating Oven
Anilox Roller Rotation controlled by PLC for each Printing Station
Length Count and Speed Control will display and set on touch screen.
More data will be display and set on PLC control touch screen.
It use to load heavy rolls to unwinding position
One unit printing station has come with one pcs printing cylinder,one pcs ceramic anilox, one pcs ink rubber roller and one pcs impression roller, one pcs ink container and one pcs scrapper blade.
Vertical overprint adjustment can be adjusted by 360°handwheel.
Horizontal overprint adjustment can be adjusted by handwheel.
Helical gear.
All using helical gear.
Printing unit all has with gearbox.
Each color has equipped with infrared heating dryer.
Infrared heating drying oven is placed on material and after each printing station.
Heating lamp is fixed in each Infrared Heating Drying Oven.
Optional can use UV / LED UV Drying Oven.
Mainly using synchronous belt to be drive.
Die cutting parts
Delivery material is controlled by servo motor.
The die-cutting force is provided by a 5KW inverter motor driver. It is not only power-saving, but also can realize the stepless speed.
adjustment,especially when coordinate with the extra large flywheel, which make the die-cutting force strong and steady, and the electricity can be further reduced.
Flywheel driving is done by inverter motor(main reduction motor).
This system can ensure main driving oil supply regularly, and reduce friction and prolong the machine life.
The coordination between motor and Photoelectric eye which can identify colors assures the perfectly fit of the die- cutting position and figures.
We adopt good quality material that could be used for long time, and if the mold can't cut well, you could polish the blade then continue to use.
Samples pics
Hot Tags: 6 color uv flexo printing machine, China 6 color uv flexo printing machine manufacturers, suppliers, factory, multi color flexo paper label printing machine, flexo label printing machine, machine flexo, used label printing machine, flexo label press, Flexo Printing Machine For Labels
