info@westonmachinery.com    +8615068489553
Cont

Have any Questions?

+8615068489553

Oct 18, 2025

How High Is The Pressure Of An Automatic Die-Cutting Machine?

Pressure Range and Definition of Automatic Die-Cutting Machines
The pressure of an automatic die-cutting machine refers to the vertical force applied to the material by the die during cutting, measured in tons (t). According to the *Safety Standard for Printing Machinery* (GB/T 28387-2012) and industry test data:

1. Light-duty die-cutting machine: Pressure 50-100 tons, suitable for soft materials such as paper and self-adhesive labels, such as label production;

2. Medium-duty die-cutting machine: Pressure 100-200 tons, used for medium-hardness materials such as cardboard and corrugated cardboard, commonly used in packaging box processing;

3. Heavy-duty die-cutting machine: Pressure 200-300 tons and above, can handle hard materials such as leather and thin metal sheets, mostly used in automotive interiors or electronic component manufacturing.

 

Pressure selection must match the material characteristics. For example, cutting a 0.5mm thick stainless steel sheet requires at least 250 tons of pressure (data source: *Die-Cutting Technology Handbook*, Chinese Mechanical Engineering Society), while ordinary corrugated paper only requires 80 tons. Key Factors Affecting Pressure

1. Material Hardness and Thickness: The higher the tensile strength and the greater the thickness of the material, the more exponentially the required pressure increases. For example, a 1mm thick PVC board requires 120 tons of pressure, while an aluminum alloy of the same thickness requires 180 tons.

2. Die Design: The sharpness and angle of the die directly affect pressure efficiency. A dull die can increase pressure requirements by 20%-30%.

3. Equipment Precision: The stability error of the hydraulic system must be controlled within ±5%, otherwise pressure fluctuations will reduce cut quality.

 

Practical Application Case Study of Pressure Control: A packaging plant using a 150-ton die-cutting machine to produce medical cardboard boxes reduced the pressure from 140 tons to 125 tons through the following optimizations:

- Use a high-precision laser die to reduce friction loss;

- Adjust the feeding speed to 15 meters per minute to avoid material accumulation resistance.

Send Inquiry